View previous topic :: View side by side topic |
| Author | Bulletin |
phicha
DD-WRT NoviceJoined: 23 Dec 2017
Posts: 22
|  Posted: Mon Dec 25, 2017 xv:36 Post subject: router reset itself dorsum to stock firmware |  | | Beloved Sir, I take EA6300 Ac1200 that i installed firmware ea6350 as said on https://www.dd-wrt.com/wiki/index.php/Supported_Devices Firmware: DD-WRT v3.0-r34080 std (12/14/17)
Fourth dimension: 01:04:14 upward four min, load average: 0.03, 0.06, 0.02
WAN IP: 192.168.0.16 I try with triple update firmware already..
merely after a hour subsequently employ connection or without connection. the router reboot itself back with stock firmware, that i need to reupdate firmware back to dd-wrt or click button on troubleshooting "back to oldes firmware" how can i fix ? cheers | |
| Dorsum to tiptop |   |
 |
Sponsor
| |
| |
Per Yngve Berg
DD-WRT GuruJoined: 13 Aug 2013
Posts: 6373
Location: Romerike, Norway
| | Posted: Mon Dec 25, 2017 21:37 Postal service discipline: | | | Does the router take ii FW Partitions? When you flash from stock, dd-wrt will exist on sectionalization two and stock nonetheless on division one. If the router fails to boot upwards completely, it volition switch to the other partition and boot stock FW. | |
| Back to top | |
| |
phicha
DD-WRT NoviceJoined: 23 Dec 2017
Posts: 22
| | Posted: Monday Dec 25, 2017 23:35 Post subject area: | | | Per Yngve Berg wrote: | | Does the router have 2 FW Partitions? When y'all wink from stock, dd-wrt will be on partition 2 and stock still on partition 1. If the router fails to kicking up completely, information technology will switch to the other partitioning and boot stock FW. | Cheers Mr. I enable sshd and remote with ssh.
try command df
Filesystem 1K-blocks Used Available Employ% Mounted on
/dev/root 24960 24960 0 100% / control blkid
/dev/mtdblock3: Type="squashfs"
/dev/mtdblock5: TYPE="squashfs" fdisk -50
testify empty How can I bank check there is 2 fw partition ?
and how to cheque if router fail to kick and fix it ?
i check and read that if i update same firmware two times it will install 2 fw sectionalisation with aforementioned firmware.. simply somehow it nevertheless reset to stock firmware itself.. I try command but information technology evidence not institute
root@FastNet:/# ubootenv get boot_part
-sh: ubootenv: not found
root@FastNet:/# fw_printenv boot_part
-sh: fw_printenv: not establish
root@FastNet:/# fw_setenv boot_part 2
-sh: fw_setenv: not found
root@FastNet:/# where can i find path for this command ? I enable syslogd
and get some yellowish warning and red fault besides Yellow Alert | Code: | FastNet kern.warn kernel: PCI: Fixing upwardly bus i domain 2
FastNet kern.err kernel: bcmsflash: found no supported devices
Jan i 00:33:16 FastNet kern.warn kernel: The offset outset=200000, 2d commencement=1f00000
Jan 1 00:33:16 FastNet kern.warn kernel: Boot partitioning size = 524288(0x80000)
Jan 1 00:33:xvi FastNet kern.warn kernel: lookup_nflash_rootfs_offset: offset = 0x200000 size = 0x1d00000, 0x20000
Jan 1 00:33:16 FastNet kern.warn kernel: lookup_nflash_rootfs_offset: offset = 0x1f00000 size = 0x100000, 0x20000
January one 00:33:16 FastNet kern.warn kernel: mtd: partition "rootfs2" extends beyond the stop of device "nflash" -- size truncated to 0x5ec9c24
Jan 1 00:33:16 FastNet kern.warn kernel: nf_conntrack_rtsp v0.7 loading
January 1 00:33:sixteen FastNet kern.warn kernel: nf_nat_rtsp v0.vii loading
Jan 1 00:33:16 FastNet kern.warn kernel: Spare area=64 eccbytes 56, ecc bytes located at:
Jan 1 00:33:16 FastNet kern.warn kernel: 2 three 4 5 vi seven viii 9 10 11 12 13 fourteen fifteen 18 19 20 21 22 23 24 25 26 27 28 29 thirty 31 34 35 36 37 38 39 40 41 42 43 44 45 46 47 50 51 52 53 54 55 56 57 58 59 60 61 62 63
Jan one 00:33:16 FastNet kern.warn kernel: Available 7 bytes at (off,len):
Jan 1 00:33:16 FastNet kern.warn kernel: (1,ane) (16,2) (32,2) (48,2) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0)
January ane 00:33:16 FastNet kern.info kernel: Scanning device for bad blocks
Jan 1 00:33:16 FastNet kern.warn kernel: Bad eraseblock 192 at 0x000001800000
Jan 1 00:33:16 FastNet kern.warn kernel: Bad eraseblock 222 at 0x000001bc0000
Jan ane 00:33:16 FastNet kern.warn kernel: Bad eraseblock 299 at 0x000002560000
Jan ane 00:33:16 FastNet kern.warn kernel: Bad eraseblock 398 at 0x0000031c0000
Jan one 00:33:16 FastNet kern.warn kernel: Bad eraseblock 425 at 0x000003520000
Jan 1 00:33:16 FastNet kern.warn kernel: Bad eraseblock 493 at 0x000003da0000
Jan i 00:33:xvi FastNet kern.warn kernel: Bad eraseblock 511 at 0x000003fe0000
Jan 1 00:33:sixteen FastNet kern.warn kernel: Bad eraseblock 512 at 0x000004000000
January 1 00:33:16 FastNet kern.warn kernel: Options: CACHEPRG,NO_SUBPAGE_WRITE, January 1 00:33:16 FastNet kern.warn kernel: et: module license 'Proprietary' taints kernel.
January ane 00:33:16 FastNet kern.warn kernel: Disabling lock debugging due to kernel taint
Jan ane 00:33:16 FastNet kern.warn kernel: et_module_init: passivemode set to 0x0
Jan 1 00:33:16 FastNet kern.warn kernel: et_module_init: txworkq gear up to 0x0
January 1 00:33:16 FastNet kern.warn kernel: et_module_init: et_txq_thresh set to 0x400
Jan 1 00:33:16 FastNet kern.warn kernel: et_module_init: et_rxlazy_timeout set to 0x3e8
Jan ane 00:33:16 FastNet kern.warn kernel: et_module_init: et_rxlazy_framecnt set to 0x20
Jan 1 00:33:16 FastNet kern.warn kernel: et_module_init: et_rxlazy_dyn_thresh fix to 0 Jan 1 00:33:16 FastNet kern.warn kernel: eth0: Broadcom BCM47XX 10/100/chiliad Mbps Ethernet Controller 7.14.89.21 (r524987) Jan 1 00:33:16 FastNet kern.warn kernel: wl_module_init: passivemode fix to 0x0
Jan i 00:33:sixteen FastNet kern.warn kernel: wl_module_init: txworkq set to 0x0
Jan 1 00:33:16 FastNet kern.warn kernel: eth1: Broadcom BCM4360 802.eleven Wireless Controller 7.fourteen.89.21 (r524987)
Jan one 00:33:sixteen FastNet kern.warn kernel: PCI: Enabling device 0002:01:00.0 (0140 -> 0142)
Jan i 00:33:16 FastNet kern.warn kernel: eth2: Broadcom BCM43227 802.11 Wireless Controller 7.14.89.21 (r524987)
January 1 00:33:16 FastNet kern.warn kernel: eth0: mixed HW and IP checksum settings. Jan 1 00:33:sixteen FastNet kern.warn kernel: COEX: downgraded chanspec 0x1909 to 0x100b: channel 5 used by exiting BSSs
January 1 00:33:16 FastNet kern.warn kernel: COEX: downgraded chanspec 0x1803 to 0x1001: ext channel five used equally ctrl channel past existing BSSs
January one 00:33:16 FastNet kern.warn kernel: COEX: downgraded chanspec 0x1807 to 0x1005: ctrl channel: v existing ext. aqueduct | Carmine Error | Code: |
Jan 1 00:33:16 FastNet kern.err kernel: bcmsflash: plant no supported devices
January 1 00:33:sixteen FastNet kern.err kernel: blk_update_request: I/O error, dev mtdblock5, sector 193920
January 1 00:33:xvi FastNet kern.err kernel: blk_update_request: I/O mistake, dev mtdblock5, sector 193920
Jan 1 00:33:16 FastNet kern.err kernel: Buffer I/O error on dev mtdblock5, logical block 96960, async folio read
Jan 1 00:33:16 FastNet kern.err kernel: blk_update_request: I/O error, dev mtdblock5, sector 193922
Jan 1 00:33:16 FastNet kern.err kernel: Buffer I/O fault on dev mtdblock5, logical block 96961, async folio read
Jan i 00:33:16 FastNet kern.err kernel: blk_update_request: I/O error, dev mtdblock5, sector 193924
January 1 00:33:16 FastNet kern.err kernel: Buffer I/O error on dev mtdblock5, logical block 96962, async page read
January 1 00:33:xvi FastNet kern.err kernel: blk_update_request: I/O error, dev mtdblock5, sector 193926
January one 00:33:16 FastNet kern.err kernel: Buffer I/O error on dev mtdblock5, logical block 96963, async page read | Simply I am not empathize it what it mean .. Thank you. | |
| Dorsum to superlative | |
| |
Per Yngve Berg
DD-WRT GuruJoined: 13 Aug 2013
Posts: 6373
Location: Romerike, Norway
| | Posted: Tue Dec 26, 2017 9:46 Post subject: | | | I remember you use the wrong FW. You have this router: https://wikidevi.com/wiki/Linksys_EA6300_v1 which is actually an EA6400. https://www.smallnetbuilder.com/wireless/wireless-features/32089-a-dainty-surprise-for-early-linksys-ea6300-buyers Check the FCC ID on the label. | |
| Dorsum to top | |
| |
phicha
DD-WRT NoviceJoined: 23 Dec 2017
Posts: 22
| | Posted: Tue December 26, 2017 11:51 Post subject: | | | Per Yngve Berg wrote: | | I recollect you lot use the wrong FW. You have this router: https://wikidevi.com/wiki/Linksys_EA6300_v1 which is actually an EA6400. https://www.smallnetbuilder.com/wireless/wireless-features/32089-a-prissy-surprise-for-early on-linksys-ea6300-buyers Check the FCC ID on the label. | Thank you
My router FCC ID is Q87-EA6300
Model EA6300
It is correct on bottom router | |
| Back to top | |
| |
gu3d3s
DD-WRT UserJoined: 10 Aug 2017
Posts: 70
Location: Fortalaza - CE - Brazil
| |
| Back to pinnacle | |
| |
Per Yngve Berg
DD-WRT GuruJoined: thirteen Aug 2013
Posts: 6373
Location: Romerike, Kingdom of norway
| | Posted: Tue December 26, 2017 12:54 Mail bailiwick: | | You lot shall have a BCM4352, not BCM4360 | Quote: | | Jan one 00:33:16 FastNet kern.warn kernel: eth1: Broadcom BCM4360 802.eleven Wireless Controller 7.14.89.21 (r524987) | Co-ordinate to the Supported Device List, FW for EA6350 shall be used. ftp://ftp.dd-wrt.com/betas/2017/12-14-2017-r34080/linksys-ea6350/linksys-ea6350-webflash.bin | |
| Back to top | |
| |
Per Yngve Berg
DD-WRT GuruJoined: xiii Aug 2013
Posts: 6373
Location: Romerike, Norway
| | Posted: Tue Dec 26, 2017 thirteen:01 Post subject: | | | EA6200 is the same, use EA6350. | |
| Back to top | |
| |
phicha
DD-WRT NoviceJoined: 23 Dec 2017
Posts: 22
| | Posted: Tue December 26, 2017 13:20 Post subject: | | | Per Yngve Berg wrote: | You shall take a BCM4352, not BCM4360 | Quote: | | Jan i 00:33:16 FastNet kern.warn kernel: eth1: Broadcom BCM4360 802.11 Wireless Controller vii.14.89.21 (r524987) | According to the Supported Device List, FW for EA6350 shall be used. ftp://ftp.dd-wrt.com/betas/2017/12-xiv-2017-r34080/linksys-ea6350/linksys-ea6350-webflash.bin | yes. i already update with this firmware from stock but information technology said too big. and then first i update information technology with ftp://ftp.dd-wrt.com/betas/2017/eleven-16-2017-r33772/linksys-ea6350/linksys-ea6350-webflash.bin than i update information technology with ftp://ftp.dd-wrt.com/betas/2017/12-xiv-2017-r34080/linksys-ea6350/linksys-ea6350-webflash.bin and information technology successfully. but information technology sometimes reset by itself to stock firmware. and i demand to reupdate or click revert to before firmware.. | |
| Dorsum to top | |
| |
Per Yngve Berg
DD-WRT GuruJoined: xiii Aug 2013
Posts: 6373
Location: Romerike, Norway
| | Posted: Tue December 26, 2017 13:38 Mail service subject: | | | Is information technology OK if yous stay on 33772? 33986 is the latest before the file size increase. | |
| Dorsum to top | |
| |
phicha
DD-WRT NoviceJoined: 23 Dec 2017
Posts: 22
| | Posted: Tue Dec 26, 2017 15:02 Mail service subject: | | | Per Yngve Berg wrote: | | Is it OK if you stay on 33772? 33986 is the latest before the file size increase. | Thanks..
I endeavour reboot and restart router many time already subsequently install 33772 firmware and it non back to stock firmware. But there is another problem ini connection that i set as repeater 2,4ghz there is no problem on r34080 i lost connexion ping to my primary router after well-nigh five-10 minutes. only still i can ping my repeater dd-wrt. and i check syslog there is some other cerise and yellow
Dec 26 14:53:10 FastNet daemon.err process_monitor[4915]: Final update failed, nosotros need to re-update after 30 seconds Dec 26 xiv:53:23 FastNet user.warn igmpproxy[4921]: The origin for route 239.255.255.250 changed from 192.168.43.147 to 192.168.0.200
Dec 26 14:53:37 FastNet user.warn igmpproxy[4921]: The origin for route 239.255.255.250 changed from 192.168.0.200 to 192.168.100.1
Dec 26 fourteen:53:38 FastNet user.warn igmpproxy[4921]: The origin for route 239.255.255.250 changed from 192.168.100.1 to 192.168.0.1 And I tin can only reenable the ping to primary router by using
click button apply settings on dd-wrt
Cheers.. | |
| Back to top | |
| |
phicha
DD-WRT NoviceJoined: 23 December 2017
Posts: 22
| | Posted: Tue Dec 26, 2017 sixteen:08 Postal service subject: | | | Sori, Information technology seem working very fine, after i restart my primary router. there is no back to stock firmware and also no ping timeout to chief.. shortly volition info again. | |
| Back to meridian | |
| |
phicha
DD-WRT NoviceJoined: 23 Dec 2017
Posts: 22
| | Posted: Wednesday Dec 27, 2017 eight:01 Post subject: | | | Per Yngve Berg wrote: | | Is it OK if you stay on 33772? 33986 is the latest before the file size increase. | Sori this afternoon, I check the router come back to stock firmware again.. | |
| Dorsum to top | |
| |
gu3d3s
DD-WRT UserJoined: x Aug 2017
Posts: 70
Location: Fortalaza - CE - Brazil
| | Posted: Wed Dec 27, 2017 11:48 Mail service field of study: | | Strange things happen, at present all wifi networks have the aforementioned MAC address of both ii.four and 5Ghz and before information technology was one for each, any and all vs of the DD-WRT that I always effort to install the KERNEL PANIC, and does not cease the kick.
_________________
Linksys WRT3200ACM - Lede - WRT1900ACS/V2 - 35034 - TP-Link Archer C7/V2 - 35034 - TP-Link Archer C50 V1(die)- Linksys EA-6200 (stock  ) | |
| Back to meridian | |
| |
phicha
DD-WRT NoviceJoined: 23 Dec 2017
Posts: 22
| | Posted: Fri Dec 29, 2017 16:xi Post subject area: | | | Per Yngve Berg wrote: | | Is it OK if you stay on 33772? 33986 is the latest before the file size increase. | Wireless Concrete Interface wl0 [5 GHz/802.11ac]
Physical Interface wl0 - SSID [Yoha5] HWAddr Wireless Style
Wireless Network Mode
Wireless Network Proper name (SSID)
Yoha5
Wireless Channel
Channel Width
Wireless SSID BroadcastEnable Disable
Optimize Multicast TrafficEnable Disable
Explicit BeamformingEnable Disable
Implicit BeamformingEnable Disable
Airtime FairnessEnable Disable
Network ConfigurationUnbridged Bridged The 5G wifi is not working.. I try discover it by using android and tablet windows and notebook. the ssid is not showing.. ( my phone is redmi note two, it back up air conditioning) | |
| Back to top | |
| |
| | Display posts from previous: | Page 1 of 1 | |
0 Response to "Uploaded Dd-wrt to My Router and It Rebooted to Stock"
ارسال یک نظر